No image yet
Heating technology
Pellet Fireplace Insert QM0502A
Pellet fireplace insert for an existing chimney opening, fitted flush with the surround. Rated at 5.1 kW for rooms up to 50 m², with ten hours of operation per filling.
The unit is set into the masonry opening and finishes flush with the surround. It burns pellets of 6.0 mm diameter and 10 to 30 mm length, consuming between 0.63 and 1.11 kg per hour depending on load. Efficiency is stated as 94.5 percent, and 91.1 percent at the lower output.
The insert measures 498 mm wide and 595 mm deep, with a net weight of 44 kg. Combustion air and flue gas run through pipes of 48 and 80 mm. The catalogue lists the colours black, white and red. Power supply is 230 V, 50 Hz.
Technical data
- Dimensions W x D x H
- 498 x 595 x 489 mm
- Packing dimensions W x D x H
- 558 x 645 x 624 mm
- Rated heat output (max./min.)
- 5.1(3.0)KW
- Pellet consumption (min.-max.)
- 0.63-1.11kg/h
- Net weight
- 44kg
- Pellet hopper capacity
- 44kg
- Operating time per filling
- 10H
- Air inlet/flue pipe
- Φ48/Φ80mm
- Efficiency
- 94.5(91.1)%
- Pellet size
- Φ6.0x(10-30)mm
- Heatable area
- 50m2
- CO at 13% O2
- 217 mg/m3
- Rated voltage and frequency
- 230V/50Hz
- Units per 20GP/40HQ
- 105/300