No image yet
Lifts
Hydraulic Home Lifting Platform
A passenger lift with a hydraulic power unit and a T-shaped rail, for 300 to 1000 kg and two to six landings. No masonry shaft is required, and the catalogue puts the pump unit at 30 decibels.
The car runs on a T-shaped rail, driven by cylinder and power unit. The catalogue lists eight protective devices, among them a light curtain, a door interlock and an emergency lowering function powered by a UPS. The car floor acts as a safety edge: if it meets an obstacle, travel stops.
Doors are available as centre opening and side opening versions, as a manual swing door and as a folding door. Car lighting switches itself off when nobody is travelling. Car and door dimensions follow the measurements taken on site.
Technical data
- Load capacity
- 300 to 1000 kg
- Landings
- 2 to 6
- Speed
- 0.1 to 0.15 m/s
- Door operation
- Manual or electric
- Door opening
- Side opening or centre opening
- Voltage
- 220 V / 380 V
- Control voltage
- 24 V
- Car dimensions
- Width × depth × height according to site measurements
- Door dimensions
- Width × height, customizable
- Standard version 180 kg / 2 persons
- Shaft opening 1100 × 1100 mm, car 900 × 700 mm, manual door 650 mm
- Standard version 260 kg / 3 persons
- Shaft opening 1100 × 1300 mm, car 900 × 900 mm, manual door 650 mm
- Standard version 260 kg / 3 persons, side drive
- Shaft opening 1300 × 1100 mm, car 880 × 925 mm, manual door 700 mm
- Door arrangements for villas
- Three door sides, opposite through-car doors or doors at an angle, each up to 260 kg
- Headroom
- 2200 to 3000 mm
- Travel height
- 250 to 12000 mm
- Pit
- Reserved pit 50 mm below floor level
- Noise of the pump unit
- 30 decibels
- Installation site
- Indoor
- Emergency operation
- Backup power supply
- Standard (stated by the factory)
- Manufacturing certified to GB/T 19001:2016 and ISO 9001:2015
- Warranty (stated by the factory)
- One year